[. . . ] , If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Make sure that all parts of the ice-cream maker are entirely clean, especially the parts that come into contact with the icecream mixture. [. . . ] , You can find delicious recipes and many tips in the separate recipe booklet!Do not rinse the frozen cooling disc, as this will cause a thick film of ice to develop on the outside of the disc right away!) 5 Push the motor unit downwards into the cover until it locks into place (you will hear a click) (Fig. 7 Place the cover with the motor unit attached onto the bowl in the right position. Press the cover down until it locks into place and push the clamps towards the bowl until they snap home (you will hear a click). Making ice cream 1 Before putting the ingredients in the bowl, switch the appliance on by pressing one of the two buttons. thisisnecessarytopreventtheingredientsfromfreezingontothecoolingdiscrightaway. Pour the mixture of ingredients into the bowl via the opening in the cover. Let the appliance operate until the pilot light starts blinking to indicate that the time required for preparing a standard quantity of ice cream has elapsed. When the ice cream is ready, switch the appliance off by pressing the appropriate button again. [. . . ] Environment , Do not throw away the machine with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. Se till att alla delar till glassmaskinen är helt rena, särskilt delarna som kommer i kontakt med glassblandningen. [. . . ]